304 stainless steel sheet and plate (UNS S30400)
304 (UNS S30400, EN 1.4301) is the most widely used austenitic stainless steel: 18% chromium, 8% nickel, non-magnetic in the annealed condition and suitable for food-contact, architectural and general fabrication. Supplied as cold-rolled sheet from 0.3 mm and hot-rolled plate to 100 mm.
- Grade
- 304 / 304L
- Standard
- ASTM A240, EN 10088-2
- Finish
- 2B, BA, No.4, HL, 8K
- Lead time
- 7–15 days
304 / 304L specification summary
| Grade | 304 (UNS S30400) / 304L (UNS S30403) |
|---|---|
| European designation | EN 1.4301 / EN 1.4307 |
| Japanese designation | SUS304 / SUS304L |
| Product standard | ASTM A240/A240M, EN 10088-2 |
| Form supplied | Cold-rolled sheet, hot-rolled plate, cut-to-length |
| Typical thickness range | 0.3–3.0 mm cold rolled; 3.0–100 mm hot rolled |
| Typical width | 1000 / 1219 / 1500 mm; cut to width on request |
| Typical length | 2000 / 2438 / 3000 mm; cut to length on request |
| Surface finish | 2B, BA, No.4, hairline, 8K mirror, embossed |
| Edge | Mill edge or slit edge; deburred on request |
| Certification | EN 10204 3.1 mill test certificate with each shipment |
| Packaging | Wooden pallet, interleaved, strapped and edge-protected |
Typical ranges are shown for guidance. Confirm the exact thickness, width, length and tolerance on the quotation before ordering; the mill certificate that arrives with the goods states the values actually supplied.
Chemical composition
| Grade | C max | Mn max | P max | S max | Si max | Cr | Ni | N max |
|---|---|---|---|---|---|---|---|---|
| 304 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 18.0–20.0 | 8.0–10.5 | 0.10 |
| 304L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 18.0–20.0 | 8.0–12.0 | 0.10 |
Values are standard limits for the designation, not a statement about a specific heat. The mill certificate states the measured composition of the material supplied.
Mechanical properties
| Grade | Tensile strength, min | Yield strength 0.2%, min | Elongation in 50 mm, min | Hardness, max |
|---|---|---|---|---|
| 304 | 515 MPa | 205 MPa | 40% | 201 HBW |
| 304L | 485 MPa | 170 MPa | 40% | 201 HBW |
Available finishes
| 2B | Cold rolled, annealed and pickled, then skin-passed. The default for most fabrication and the easiest surface to clean. |
|---|---|
| BA | Bright annealed in a controlled atmosphere. Reflective, smoother than 2B, used for appliances and food equipment. |
| No.4 | Polished with a 150-grit abrasive belt. A uniform brushed appearance for architectural and catering work. |
| Hairline (HL) | Long, continuous brushed lines, typically on 2B substrate. Used for lift panels and cladding. |
| 8K mirror | Polished to a mirror finish. Specified where reflections must be distortion-free, such as decorative panels. |
Applications
- Kitchenware and tableware
- Food processing equipment
- Architectural cladding and handrails
- Medical and laboratory furniture
- General fabrication tanks
Quality documents
Every shipment includes an EN 10204 3.1 mill test certificate stating the heat number, chemical composition and mechanical properties. PMI and third-party pre-shipment inspection are available on request.
How quality is controlled304 / 304L questions
What is the difference between 304 and 304L?
304L has a maximum carbon content of 0.030% instead of 0.08%, which reduces carbide precipitation during welding and lowers the risk of intergranular corrosion in the heat-affected zone. It is specified for welded assemblies that cannot be solution-annealed after welding.
Is 304 stainless steel magnetic?
Annealed 304 is austenitic and essentially non-magnetic, but cold working — deep drawing, bending, cutting — can form strain-induced martensite and make the material weakly magnetic. Slight attraction is not in itself a defect.
Will 304 rust outdoors?
304 performs well in rural and urban atmospheres but can develop tea staining in coastal or chloride-bearing environments. For those conditions, 316L is the usual upgrade because its molybdenum content raises pitting resistance.
Can you supply 304 sheet cut to size?
Yes. Cut-to-length and cut-to-width service is available. Send the required thickness, width, length, finish and quantity with your inquiry and the quotation will state cutting tolerance and packing.
What is the minimum order quantity?
MOQ depends on grade, thickness and finish and is confirmed on the quotation. Free samples are available so the surface and tolerance can be checked before a production order.
Packing and loading
- Export packing to the method stated on the quotation
- Marking with grade, size, heat number and order reference
- Moisture protection for sea freight
- Loading photographs supplied before departure
Related products
316L
316L (UNS S31603, EN 1.4404) adds 2–3% molybdenum to the 18/8 base, raising resistance to pitting and crevice corrosion in chlorides.
View specifications
321
321 (UNS S32100, EN 1.4541) is a titanium-stabilised austenitic grade that resists intergranular corrosion after welding and performs in continuous service up to about 870 °C.
View specifications
C12200
Refrigeration and air-conditioning copper tube made to DIN 8905 and EN 12735 T1/T2 from 99.9% copper, blank inside, clean and dry — supplied in pancake coils and straight lengths in soft, half-hard and hard temper..
View specificationsNeed this grade in another form?
304 / 304L is also supplied in the other forms listed for stainless steel.