Copper: tube, plate, strip and bar
High-conductivity copper in tube, plate, strip and bar form, including refrigeration and air-conditioning tube made to DIN 8905 and EN 12735 T1/T2 from 99.9% copper, clean and dry inside.
What copper is used for
Copper is specified where electrical and thermal conductivity matter more than strength: heat exchangers, refrigeration circuits, busbars, roofing and architectural work. Oxygen-free and phosphorus-deoxidised grades behave differently under brazing and welding, so the temper and grade are quoted together with the form.
Forms available: Tube / pipe · Plate / sheet · Strip / coil · Bar. Other forms and tempers are quoted on request against your drawing or standard reference.
Copper grades and equivalents
Cross-references for the grades quoted most often. Equivalent designations are close but not always identical in chemistry, so a specification should always name the standard it is written against.
| Grade | UNS / AISI | EN designation | Forms |
|---|---|---|---|
| C11000 (ETP) | C11000 | Cu-ETP | Plate, strip, bar, busbar |
| C12200 (DHP) | C12200 | Cu-DHP | Tube, plate, strip |
| C12000 (DLP) | C12000 | Cu-DLP | Tube, plate |
| C70600 (90/10 Cu-Ni) | C70600 | CuNi10Fe1Mn | Tube, plate |
Other grades in this family are available on request. If your specification names a standard not listed here, send it and we will confirm availability and lead time.
Product forms available
The same grade behaves differently depending on how it is rolled, drawn or cut. Specify the form, the size and the condition together.
Plate / sheet
Copper plate / sheet supplied to the grade, size and condition stated on your order.
Coil / strip
Copper coil / strip supplied to the grade, size and condition stated on your order.
Pipe / tube
Copper pipe / tube supplied to the grade, size and condition stated on your order.
Bar / rod
Copper bar / rod supplied to the grade, size and condition stated on your order.
Profile
Copper profile supplied to the grade, size and condition stated on your order.
Specification pages in this family
What to send with an inquiry
| Grade | Trade number, UNS or EN designation, and the standard it is specified against |
|---|---|
| Form | Plate, sheet, coil, strip, pipe, tube, bar, rod or profile |
| Thickness / wall | Nominal value with tolerance class if the application is critical |
| Width / diameter | Mill width or slit width; outside diameter for pipe and bar |
| Length | Random, fixed or cut to length |
| Surface | Mill finish, Bright annealed, Pickled, Oxygen-free (OF) |
| Quantity | Tonnes, pieces or coils, with the unit stated |
| Certification | EN 10204 3.1 mill certificate, third-party inspection, PMI |
| Packing | Pallet, case, bundle, interleaving, marking and shipping marks |
Delivery is normally 7–15 days. Exceptional tonnages or special specifications take longer, and the confirmed date is stated on the quotation.
Surface finishes and typical use
Finishes quoted
- Mill finish
- Bright annealed
- Pickled
- Oxygen-free (OF)
Finish is a process, not a colour. Where appearance or cleanability is regulated, state the finish by its standard designation and, for polished work, the roughness value.
How finishes are specifiedTypical applications
- HVAC and refrigeration
- Heat exchange
- Electrical
- Architectural
- Marine
Copper questions buyers ask
What is the difference between C11000 and C12200 copper?
C11000 is electrolytic tough pitch copper with very high conductivity, used for busbars and electrical strip. C12200 is phosphorus-deoxidised copper, which brazes and welds more reliably and is the usual choice for refrigeration and plumbing tube.
Do you supply copper tube to EN 12735?
Yes — refrigeration and air-conditioning tube is quoted to DIN 8905 and EN 12735 T1/T2, in plain condition, made from 99.9% copper, blank inside, clean and dry. Other standards can be quoted on request.
Can copper tube be supplied in coils or straight lengths?
Both. Pancake coils are standard for refrigeration work and straight lengths in hard temper for construction and industrial piping. State the outer diameter, wall thickness, temper and length when you inquire.
Send a specification
Grade, form, size, finish and quantity is enough for a firm quotation.
Other material families
Compare grades across stainless, copper, aluminium, carbon, galvanized and alloy steel.