ISO certified · CE certified · 5,000 t annual export capacity sdsteel@chunkang.ltd · +86 147 6353 9656
Copper tubes in bundles, ready for export packing
Bundles of copper tubes stacked in the warehouse Steel stock prepared for export packing at the warehouse
Copper · Tube & pipe

Copper tube for refrigeration and air conditioning (EN 12735)

Refrigeration and air-conditioning copper tube made to DIN 8905 and EN 12735 T1/T2 from 99.9% copper, blank inside, clean and dry — supplied in pancake coils and straight lengths in soft, half-hard and hard temper.

Purity
99.9% Cu
Standard
DIN 8905, EN 12735
Temper
Soft / half-hard / hard
Delivery
7–15 days

Request price and mill certificate

Tell us the grade, form, size and quantity. Reply within 24 hours, Monday–Saturday.

Share a drawing or specification sheet by email to sdsteel@chunkang.ltd.

This form opens your email app so your message reaches our sales desk directly. You can also write to sdsteel@chunkang.ltd or message Leo on WhatsApp.

Specifications

C12200 specification summary

Table 1 — C12200 supply specification
GradeC12200 (Cu-DHP), 99.9% copper
Product standardDIN 8905, EN 12735 T1/T2
Form suppliedPancake coil, straight length
ConditionBlank inside, clean and dry; capped ends
TemperSoft (annealed), half-hard, hard
Typical outside diameterQuoted per order — OD, wall thickness and length confirmed on the quotation
ApplicationRefrigeration, air conditioning, heat exchange
CertificationMill test certificate with each shipment
PackagingCarton or wooden case, coil or bundle

Typical ranges are shown for guidance. Confirm the exact thickness, width, length and tolerance on the quotation before ordering; the mill certificate that arrives with the goods states the values actually supplied.

Composition

Chemical composition

Table 1 — Typical composition of C12200 copper tube, % by weight
GradeCuPOther
C1220099.90 min0.015–0.040Balance within standard limits

Values are standard limits for the designation, not a statement about a specific heat. The mill certificate states the measured composition of the material supplied.

Finishes

Available finishes

Table 2 — Finish options and what they are for
Mill finishClean, dry, capped bore. Standard for HVAC and refrigeration installation.
Bright annealedReflective outer surface where appearance matters.
Use

Applications

  • Split air conditioning
  • Commercial refrigeration
  • Heat exchangers
  • Chiller pipework
  • Plumbing and medical gas on request
Applications by industry

Quality documents

Every shipment includes an EN 10204 3.1 mill test certificate stating the heat number, chemical composition and mechanical properties. PMI and third-party pre-shipment inspection are available on request.

How quality is controlled

C12200 questions

What does T1/T2 mean in EN 12735?

T1 and T2 are the two tube types defined in EN 12735-1 for air conditioning and refrigeration. T1 is the standard wall thickness for general use; T2 is a thinner wall used where weight and cost matter and the pressure rating still allows it.

Is the tube capped and dry inside?

Yes. Tube is supplied blank inside, clean and dry with capped ends, which is the condition refrigeration installers require to avoid moisture and swarf entering the circuit.

Can you supply copper tube in cut lengths?

Straight lengths in hard temper can be cut to the length stated on the order. State the OD, wall thickness, temper and length when you inquire.

Packing and loading

Container loading with export-packed steel
  • Export packing to the method stated on the quotation
  • Marking with grade, size, heat number and order reference
  • Moisture protection for sea freight
  • Loading photographs supplied before departure
WhatsApp Email Call