DX51D+Z hot-dip galvanized steel sheet
DX51D+Z is the standard forming and bending grade of hot-dip galvanized steel to EN 10346, supplied with regular spangle or skin-passed surface and zinc coatings from Z120 to Z275 for roofing, ducting and general fabrication.
- Grade
- DX51D+Z
- Coating
- Z120 – Z275
- Standard
- EN 10346, JIS G3302
- Delivery
- 7–15 days
DX51D+Z specification summary
| Grade | DX51D+Z |
|---|---|
| Product standard | EN 10346 |
| Common equivalents | SGCC (JIS G3302) — approximate, confirm against project specification |
| Coating mass | Z120, Z180, Z275 (g/m² total both sides) |
| Form supplied | Sheet, coil, cut-to-length |
| Surface | Regular spangle, skin-passed, chromate passivated, oiled |
| Typical thickness range | Quoted per order — thickness, width and length confirmed on the quotation |
| Certification | Mill test certificate with each shipment |
| Packaging | Wooden pallet, strapped, moisture barrier |
Typical ranges are shown for guidance. Confirm the exact thickness, width, length and tolerance on the quotation before ordering; the mill certificate that arrives with the goods states the values actually supplied.
Chemical composition
| Grade | Yield strength | Tensile strength | Elongation, min |
|---|---|---|---|
| DX51D+Z | 140–300 MPa | 270–500 MPa | 22% |
Values are standard limits for the designation, not a statement about a specific heat. The mill certificate states the measured composition of the material supplied.
Available finishes
| Regular spangle | Visible crystalline zinc pattern. Standard for construction and ducting. |
|---|---|
| Skin-passed | Slight rolling after coating to improve flatness and surface for painting. |
| Chromate passivated | Surface treatment that limits white rust during storage and transport. |
| Colour coated | Coil-coated finish quoted on request for roofing and cladding. |
Applications
- Roofing and cladding
- HVAC ducting
- Steel framing
- Appliances
- Agricultural equipment
Quality documents
Every shipment includes an EN 10204 3.1 mill test certificate stating the heat number, chemical composition and mechanical properties. PMI and third-party pre-shipment inspection are available on request.
How quality is controlledDX51D+Z questions
How long will Z275 galvanized sheet last outdoors?
Service life depends on atmosphere, humidity and exposure, so no supplier can give a single number. As a rule, doubling the coating mass roughly doubles the time to red rust in the same environment; Z275 is specified where a long maintenance interval matters.
Why does galvanized sheet develop white rust?
White rust is zinc corrosion product formed when moisture is trapped between sheets or coils in storage. Chromate passivation and dry, ventilated storage greatly reduce the risk.
Packing and loading
- Export packing to the method stated on the quotation
- Marking with grade, size, heat number and order reference
- Moisture protection for sea freight
- Loading photographs supplied before departure
Related products
304 / 304L
304 (UNS S30400, EN 1.4301) is the most widely used austenitic stainless steel: 18% chromium, 8% nickel, non-magnetic in the annealed condition and suitable for food-contact, architectural and general fabrication.
View specifications
316L
316L (UNS S31603, EN 1.4404) adds 2–3% molybdenum to the 18/8 base, raising resistance to pitting and crevice corrosion in chlorides.
View specifications
321
321 (UNS S32100, EN 1.4541) is a titanium-stabilised austenitic grade that resists intergranular corrosion after welding and performs in continuous service up to about 870 °C.
View specificationsNeed this grade in another form?
DX51D+Z is also supplied in the other forms listed for galvanized steel.