Q235B carbon steel plate and coil
Q235B is the most widely used structural carbon steel in Chinese supply, with a 235 MPa minimum yield strength and good weldability. Supplied as hot-rolled plate and coil for structures, general fabrication and machinery parts.
- Grade
- Q235B
- Yield
- 235 MPa min
- Standard
- GB/T 700
- Delivery
- 7–15 days
Q235B specification summary
| Grade | Q235B |
|---|---|
| Product standard | GB/T 700 |
| Common equivalents | SS400 (JIS), S235JR (EN), A36 (ASTM) — approximate, confirm against project specification |
| Form supplied | Hot-rolled plate, coil, cut-to-length |
| Typical thickness range | Quoted per order — thickness, width and length confirmed on the quotation |
| Surface | Hot rolled black, pickled and oiled on request |
| Certification | EN 10204 3.1 mill test certificate with each shipment |
| Packaging | Bundled, strapped, edge-protected |
Typical ranges are shown for guidance. Confirm the exact thickness, width, length and tolerance on the quotation before ordering; the mill certificate that arrives with the goods states the values actually supplied.
Chemical composition
| Grade | C max | Mn max | Si max | P max | S max |
|---|---|---|---|---|---|
| Q235B | 0.20 | 1.40 | 0.35 | 0.045 | 0.045 |
Values are standard limits for the designation, not a statement about a specific heat. The mill certificate states the measured composition of the material supplied.
Mechanical properties
| Grade | Yield strength, min | Tensile strength | Elongation, min |
|---|---|---|---|
| Q235B | 235 MPa | 370–500 MPa | 21% |
Available finishes
| Hot rolled black | Standard mill finish with mill scale. |
|---|---|
| Pickled and oiled | Scale removed and oiled for painting, welding or forming. |
Applications
- Structural steelwork
- General fabrication
- Machinery frames
- Shipbuilding
- Storage tanks
Quality documents
Every shipment includes an EN 10204 3.1 mill test certificate stating the heat number, chemical composition and mechanical properties. PMI and third-party pre-shipment inspection are available on request.
How quality is controlledQ235B questions
Can Q235B be substituted for S235JR?
They share a 235 MPa minimum yield and are frequently substituted in general fabrication, but the impact-testing and chemical requirements differ. Where the drawing names S235JR, we quote to that standard rather than substituting silently.
Is Q235B weldable?
Yes. With 0.20% maximum carbon, Q235B welds readily with standard electrodes and wire. Thicker sections still need preheat control as with any structural carbon steel.
Packing and loading
- Export packing to the method stated on the quotation
- Marking with grade, size, heat number and order reference
- Moisture protection for sea freight
- Loading photographs supplied before departure
Related products
304 / 304L
304 (UNS S30400, EN 1.4301) is the most widely used austenitic stainless steel: 18% chromium, 8% nickel, non-magnetic in the annealed condition and suitable for food-contact, architectural and general fabrication.
View specifications
316L
316L (UNS S31603, EN 1.4404) adds 2–3% molybdenum to the 18/8 base, raising resistance to pitting and crevice corrosion in chlorides.
View specifications
321
321 (UNS S32100, EN 1.4541) is a titanium-stabilised austenitic grade that resists intergranular corrosion after welding and performs in continuous service up to about 870 °C.
View specificationsNeed this grade in another form?
Q235B is also supplied in the other forms listed for carbon steel.