5052 aluminium sheet and coil (EN AW-5052)
5052 is the highest-strength common non-heat-treatable aluminium alloy, with excellent fatigue strength and good resistance to salt water and industrial atmospheres. Supplied as sheet and coil for marine, transport, ducting and pressure-vessel work.
- Alloy
- 5052
- Series
- Al-Mg 5xxx
- Temper
- O, H32, H34
- Delivery
- 7–15 days
5052 specification summary
| Alloy | 5052 (UNS A95052) |
|---|---|
| European designation | EN AW-5052 |
| Product standard | ASTM B209, EN 485 |
| Form supplied | Sheet, coil, cut-to-length blank |
| Temper | O, H32, H34, H36 on request |
| Typical thickness range | Quoted per order — thickness, width and length confirmed on the quotation |
| Surface | Mill finish, PVC-coated, anodised on request |
| Certification | Mill test certificate with each shipment |
| Packaging | Wooden pallet or case, interleaved |
Typical ranges are shown for guidance. Confirm the exact thickness, width, length and tolerance on the quotation before ordering; the mill certificate that arrives with the goods states the values actually supplied.
Chemical composition
| Alloy | Mg | Cr | Fe max | Si max | Cu max | Mn max | Al |
|---|---|---|---|---|---|---|---|
| 5052 | 2.2–2.8 | 0.15–0.35 | 0.40 | 0.25 | 0.10 | 0.10 | Remainder |
Values are standard limits for the designation, not a statement about a specific heat. The mill certificate states the measured composition of the material supplied.
Available finishes
| Mill finish | Standard supply condition for industrial fabrication. |
|---|---|
| PVC coated | Protective film for visible or polished surfaces during handling and installation. |
| Anodised | Decorative or corrosion-resistant oxide layer, quoted on request. |
Applications
- Marine and boat building
- Transport panels
- HVAC ducting
- Pressure vessels
- Sheet metal fabrication
Quality documents
Every shipment includes an EN 10204 3.1 mill test certificate stating the heat number, chemical composition and mechanical properties. PMI and third-party pre-shipment inspection are available on request.
How quality is controlled5052 questions
Is 5052 suitable for marine use?
Yes. 5052 has good resistance to salt water and is widely used for boat hulls, decks and marine fittings. It is not usually specified for sustained immersion in the same way as 5083, so confirm the application with us before ordering.
Can 5052 be welded?
Yes, by TIG or MIG with a compatible 5xxx filler. Welded joints retain good strength and corrosion resistance, although the heat-affected zone softens in the H-tempers.
What does H32 temper mean?
H32 means strain hardened and then stabilised to a quarter-hard temper. It is the common default for 5052 sheet because it balances formability with strength.
Packing and loading
- Export packing to the method stated on the quotation
- Marking with grade, size, heat number and order reference
- Moisture protection for sea freight
- Loading photographs supplied before departure
Related products
304 / 304L
304 (UNS S30400, EN 1.4301) is the most widely used austenitic stainless steel: 18% chromium, 8% nickel, non-magnetic in the annealed condition and suitable for food-contact, architectural and general fabrication.
View specifications
316L
316L (UNS S31603, EN 1.4404) adds 2–3% molybdenum to the 18/8 base, raising resistance to pitting and crevice corrosion in chlorides.
View specifications
321
321 (UNS S32100, EN 1.4541) is a titanium-stabilised austenitic grade that resists intergranular corrosion after welding and performs in continuous service up to about 870 °C.
View specificationsNeed this grade in another form?
5052 is also supplied in the other forms listed for aluminium.