4140 / 42CrMo alloy steel round bar
4140 (42CrMo, EN 1.7225) is a chromium-molybdenum alloy steel with high hardenability and good fatigue resistance, used for shafts, gears, connecting rods and mould bases. Supplied as hot-rolled or annealed round bar, with quenched and tempered condition quoted on request.
- Grade
- 4140 / 42CrMo
- Standard
- ASTM A29, GB/T 3077
- Condition
- Hot rolled / annealed / Q&T
- Delivery
- 7–15 days
4140 / 42CrMo specification summary
| Grade | 4140 (UNS G41400) / 42CrMo |
|---|---|
| European designation | EN 1.7225 (42CrMo4) |
| Product standard | ASTM A29/A29M, GB/T 3077 |
| Form supplied | Round bar, square bar, plate |
| Condition | Hot rolled, annealed, or quenched and tempered on request |
| Typical diameter range | Quoted per order — diameter, length and condition confirmed on the quotation |
| Surface | Black, peeled, turned, ground on request |
| Certification | EN 10204 3.1 mill test certificate with each shipment |
| Packaging | Bundled and strapped, or wooden case |
Typical ranges are shown for guidance. Confirm the exact thickness, width, length and tolerance on the quotation before ordering; the mill certificate that arrives with the goods states the values actually supplied.
Chemical composition
| Grade | C | Mn | Si | Cr | Mo | P max | S max |
|---|---|---|---|---|---|---|---|
| 4140 | 0.38–0.43 | 0.75–1.00 | 0.15–0.35 | 0.80–1.10 | 0.15–0.25 | 0.035 | 0.040 |
| 42CrMo | 0.38–0.45 | 0.50–0.80 | 0.17–0.37 | 0.90–1.20 | 0.15–0.25 | 0.035 | 0.035 |
Values are standard limits for the designation, not a statement about a specific heat. The mill certificate states the measured composition of the material supplied.
Mechanical properties
| Condition | Tensile strength | Yield strength | Elongation | Impact |
|---|---|---|---|---|
| Quenched and tempered | ≥ 1080 MPa | ≥ 930 MPa | ≥ 12% | ≥ 63 J |
Available finishes
| Black bar | Hot-rolled surface, standard for forging and machining stock. |
|---|---|
| Peeled / turned | Bark removed for closer diameter tolerance and inspection. |
| Ground | Tight tolerance and smooth surface for shaft and spindle work. |
Applications
- Shafts and spindles
- Gears and couplings
- Mould bases
- Connecting rods
- Hydraulic components
Quality documents
Every shipment includes an EN 10204 3.1 mill test certificate stating the heat number, chemical composition and mechanical properties. PMI and third-party pre-shipment inspection are available on request.
How quality is controlled4140 / 42CrMo questions
Can you supply 4140 hardened and tempered to a hardness range?
Quenched and tempered 4140 can be quoted with a stated hardness range, typically 28–32 HRC for shaft work. Give the target hardness and section size with your inquiry so the heat treatment can be confirmed.
Is 42CrMo the same as 4140?
They are close cross-references and are widely treated as interchangeable in machinery work. The carbon and manganese ranges differ slightly, so a specification written against ASTM A29 should be quoted to ASTM A29 rather than GB/T 3077.
Packing and loading
- Export packing to the method stated on the quotation
- Marking with grade, size, heat number and order reference
- Moisture protection for sea freight
- Loading photographs supplied before departure
Related products
304 / 304L
304 (UNS S30400, EN 1.4301) is the most widely used austenitic stainless steel: 18% chromium, 8% nickel, non-magnetic in the annealed condition and suitable for food-contact, architectural and general fabrication.
View specifications
316L
316L (UNS S31603, EN 1.4404) adds 2–3% molybdenum to the 18/8 base, raising resistance to pitting and crevice corrosion in chlorides.
View specifications
321
321 (UNS S32100, EN 1.4541) is a titanium-stabilised austenitic grade that resists intergranular corrosion after welding and performs in continuous service up to about 870 °C.
View specificationsNeed this grade in another form?
4140 / 42CrMo is also supplied in the other forms listed for alloy steel.